MIDIROCK.XYZ
MIDI reference

Roland TR-8S MIDI

Look up Roland TR-8S sync, transport, channels, drum-note and routing settings, scoped to the reviewed version-3 documentation.

Published by MIDIrock.xyz · About Pete and the site · Page updated

Model scopeTR-8S guidance based on the system program 3.00 documentation. Check your unit’s version before following these menu instructions. Only sourced values are shown. Check each claim’s verification state before relying on it.

Quick reference

MIDI channel
Default 10; configurable 1–16 or OFF
Manufacturer documented
MIDI Implementation Chart v3.00
Clock and transport
Receives/transmits clock, Start and Stop; Sync Out controls transmit
Manufacturer documented
UTILITY:SYNC/TEMPO; MIDI Implementation Chart v3.00
Program Change
Transmits and recognizes 0–127; Tx/Rx controls are in UTILITY:MIDI
Manufacturer documented
UTILITY:MIDI; MIDI Implementation Chart v3.00
Instrument notes
Instrument and alternate note numbers are configurable in UTILITY:MIDI
Manufacturer documented
UTILITY:MIDI; MIDI Implementation Chart v3.00
Local switch
SOUND:LocalSw offers OFF, ON and SURFACE routing modes
Manufacturer documented
UTILITY:SOUND, Reference Manual v3.00

Sync and transport

Manufacturer documented

UTILITY:SYNC/TEMPO provides TempoSync choices AUTO, MIDI, USB and INT. AUTO follows incoming MIDI clock at MIDI IN or USB, with USB taking priority when both arrive. MIDI follows MIDI IN, USB follows USB, and INT uses the TR-8S tempo.

Sync Out controls transmission of clock, Start and Stop. RxStartStop determines whether external start/stop controls the step sequencer when following external MIDI clock.

Channels, notes and routing

Manufacturer documented

UTILITY:MIDI holds Pattern Ch, Kit Ch, Omni Mode, programmable instrument note numbers, Soft Thru, USB MIDI Thru and Program Change transmit/receive settings. Do not assume fixed drum-note assignments: the implementation chart states that instrument note numbers are configurable.

The version-3 MIDI chart lists default channel 10, configurable channels 1–16 or OFF, Program Change transmitted and recognized from 0–127, and clock, Start and Stop as transmitted and recognized.

Browse TR-8S fixes

References

Sources & review

Sources reviewed: . Documentation does not replace a physical hardware test.

Sections reviewed: MIDI Implementation Chart v3.00; UTILITY:SYNC/TEMPO; MIDI Implementation Chart v3.00; UTILITY:MIDI; MIDI Implementation Chart v3.00; UTILITY:SOUND, Reference Manual v3.00; UTILITY:SYNC/TEMPO, Reference Manual v3.00; UTILITY:MIDI, Reference Manual v3.00.