Model scopeOriginal minilogue hardware. This guide does not cover the minilogue xd, module, bass or inverted editions. Only sourced values are shown. Check each claim’s verification state before relying on it.

Quick reference

MIDI connections
DIN MIDI IN/OUT and USB B; GLOBAL 4 MIDI Route selects USB+MIDI or USB
Official manual
GLOBAL 4, Owner's Manual p. 44
MIDI channel
1–16, shared transmit and receive channel in GLOBAL 4
Official manual
GLOBAL 4, Owner's Manual p. 44
Clock source
Auto (USB), Auto (MIDI) or Internal; SYNC IN has separate priority
Official manual
GLOBAL 4, Owner's Manual pp. 44–45
MIDI message enable
Independent Enable Rx MIDI and Enable Tx MIDI controls in GLOBAL 4
Official manual
GLOBAL 4, Owner's Manual p. 44
Data dump
GLOBAL 7 provides All Dump over MIDI or USB
Official manual
GLOBAL 7, Owner's Manual p. 46

Clock and routing

Official manual

In GLOBAL 4, Clock Source offers Auto (USB), Auto (MIDI) and Internal. In either Auto mode, the minilogue uses its internal clock until clock is detected at the selected connector.

MIDI Route set to USB+MIDI uses both USB B and DIN MIDI connectors. The USB setting restricts MIDI transmission and reception to USB B. A cable at SYNC IN takes clock priority independently of the MIDI clock settings.

Channel and messages

Official manual

GLOBAL 4 sets a single MIDI Ch from 1–16 for both transmission and reception. Enable Rx MIDI and Enable Tx MIDI independently control whether the minilogue receives and transmits MIDI messages.

The owner’s manual points to Korg’s MIDI Implementation for exact message coverage. Do not infer a parameter’s CC number from the panel without checking that document.

Browse minilogue fixes

Provenance

Sources & review

Last desk review: . Documentation does not replace a physical hardware test.

Sections reviewed: GLOBAL 4, Owner's Manual p. 44; GLOBAL 4, Owner's Manual pp. 44–45; GLOBAL 7, Owner's Manual p. 46; MIDI Implementation, Korg download page.