Connection plan
Korg minilogue → Korg Prophecy
Clock the Prophecy arpeggiator from the minilogue
Needs physical verification
Physical test requiredThe documented device settings are compatible in principle, but this exact pairing and transport behavior require a physical test.
Source / MIDI OUTKorg minilogue
Destination / MIDI INKorg Prophecy
Cable: minilogue MIDI OUT → Prophecy MIDI IN
Set up the source
- Set minilogue GLOBAL 4 → Clock Source to Internal.
- Use the minilogue as the intended clock master.
Set up the destination
- On the Prophecy, open GLB-8 [MIDI].
- Set Clock Source to EXTERNAL and enable the arpeggiator.
Test the route
Start the minilogue’s clock and play a Prophecy key in the selected arpeggio keyboard scan zone.
If it does not work
- Check minilogue OUT → Prophecy IN direction.
- Check Prophecy Clock Source is EXTERNAL.
- If the arpeggio does not start, check the Prophecy keyboard scan zone.
Provenance
Sources & review
Last desk review: . Documentation does not replace a physical hardware test.
- minilogue Owner's Manual · Korg
- Prophecy Parameter Guide · Korg
Sections reviewed: minilogue synchronization procedure, Owner's Manual p. 52; Prophecy GLB-8 p. 139; Troubleshooting p. 175.